Thermosleeve™ B
Heavy wall braided glass fiber sleeve:
economical hose and cable protection
where exposure to molten splash, oils
or moisture is not a factor.
Cost-efficient high temperature performance
Thermosleeeve™ B is a heavy wall braided glass fiber sleeve capable of operating at a continuous temperature of 1000°F (538°C). High bulk fiber construction gives excellent insulation properties, and the texturized, untreated construction allows Thermosleeve ™ B to exhibit excellent dielectric strength and resistance to thermal conductivity.
Use alone or in combination
Thermosleeve™ B can be used by itself, or under other sleeve products (such as Pyrojacket®, Pyreflect™ or Silicaflex™) to significantly boost insulation values at modest cost.
Choice of grades
Thermosleeve ™ B is available in 2 grades: 1/8" (3.2 mm) wall thickness or 1/16" (1.6 mm) wall thickness.
Case Study: PTFE Hose Problems
Thermosleeve™ B - Quick Facts | |
| Inside diameters from 1/2" (13 mm) to 4" (102 mm) | |
| Continuous operating temp: | 1000°F (538°C) |
| Max short term exposure: | 1300°F (705°C) |
| Flame resistance: | Good |
| Abrasion resistance: | Very good |
| Flexibility: | Outstanding |
| Water and oil resistance: | Moderate |
Click image to enlarge
NEED INFORMATION?
REQUIRE A QUOTE?
Send us your questions
or requirements on our
quick online form. We'll
get right back to you.
